Water Supply, Construction Systems for Water  
DOI: http://www.dx.doi.org/10.24866/2227-6858/2021-1-9

Shevtsov M., Kolpakova V., Yeremeyeva Yu., Sailaukhanova Zh., Vlasov V.

MICHAEL SHEVTSOV, Doctor of Engineering Sciences, Professor, 000458@pnu.edu.ru
VLADIMIR VLASOV, Senior Lecturer, 011875@pnu.edu.ru
Institute of Civil Engineering,
Pacific National University
Khabarovsk, Russia
VALENTINA KOLPAKOVA, Doctor of Engineering Sciences, Professor (Corresponding Author), vkolpakova53@mail.ru
YULIYA YEREMEYEVA, Candidate of Engineering Sciences, Senior Lecturer, yeremeyeva83@mail.ru
School of Architecture, Construction and Design
D. Serikbayev East Kazakhstan Technical University
ZHANYL SAILAUKHANOVA, Development Manager, zhanka.akshabaeva@mail.ru
Limited liability Partnership Production and commercial firm Ulba-Electro
The Republic of Kazakhstan, East Kazakhstan Region, Ust-Kamenogorsk

Improving the quality of concrete solutions for drainage chute structures
with the use of advanced additives

Аbstract: The results of experimental studies to determine the optimal composition of concrete using the MasterGlenium 51 additive and high-quality MasterTop CC 713 sealing material produced by BASF are presented. Tests of concrete samples from the proposed compositions were carried out in laboratory conditions in order to determine the strength, water resistance and abrasion.

According to the findings: introduction of the additive is MasterGlenium 51 at a ratio of 1% of the volume of cement increases the average strength of concrete by 30% and meets the required brand of concrete strength (M300); use as impregnating MasterTop CC 713 provides the required performance for water resistance, appropriate brand concrete waterproofing W8 and the best results of abrasion. Application of additives in concrete can improve concrete structures and to extend the life of gutters, irrigation and drainage structures.

Keywords: drainage trays, concrete mortars, impregnation, hyperplasticizer, water resistance, strength, abrasion

Contribution of the authors: the authors contributed equally to this article.
The authors declare no conflicts of interests.


See the reference in English at the end of the article